Hangar Technician

OPERATIONS STAFF

Hangar Technician

Access: Maint Tunnels, Mail Sorting, Basic Operations Qualifications: At least 18 years of age, completion of the SCC's "Introduction to Refueling" program. Employers: Orion Express, Hephaestus Industries. Supervisors: Operations Manager. Duties: Sort the warehouse, make deliveries, send mail, refuel shuttles, reload ship weapons Guides: Guide to Paperwork, Guide to Communication Devices, Guide to Gunnery, Guide to Shuttle Maintenance

The Hangar Technician is responsible for managing all basic Operations-related tasks. Their duties include handling mailing requests, managing bounties, reloading the ship's weapons upon orders, and sorting and distributing warehouse contents. They also serve as the reliable "grease monkeys" ensuring that shuttles are fueled, maintained, and ready to go at a moment's notice for expeditions.

Duties

Operations Account

The Operations Department has an account with 10000 credits available for use. It is the Hangar Technician's duty to manage this account and ensure that it does not run out of funds. To maintain a healthy balance, you need to complete bounties, ship crates, ship processed ores (notably phoron and platinum), and charge for handling orders. The processed ores must be inside a crate to be counted towards the account's funds. Ideally, the Operations Account should end each shift either breaking even, or with a profit. The 10000 credits are a buffer, emergency funds, and for other Operations activities that might not generate profit.

Bounties

The most effective source of profit for the Operations Account, you can take on bounties listed on the Supply Console located in the Operations Bay. Open the Cargo Control program and select the Bounties tab to view the list of items. While some bounties can be completed by searching the warehouse, most of them require assistance from other departments. Once you obtain the required items, place them in crates and send them back in the shuttle. Then, claim your rewards in the Supply Console. Upon completing five bounties, you may request new ones.

Handling Orders

As the Hangar Technician, your responsibilities include handling orders, distributing items, and minimizing shuttle costs. To stay informed about crew requests, link your PDA to the ringer terminal and the Requests Console. This will ensure that you are promptly alerted to any demands or needs that arise.

1. Order: When a department needs equipment or materials, they can place an order using the Cargo Order program or ask you to do it for them. Retrieving items from stowage via the Cargo Lift incurs a fee on use. Combining multiple orders into a single use of the Cargo Lift can help reduce the fees for processing orders. Additionally, you can adjust the Operations Handling fee to cover any additional costs if necessary.
2. Approve/Reject: To view an order that has been placed, go to the Submitted section of the Operations Control program. There, you can see the name of the person who submitted the order and its total cost. Clicking on the Details option will provide additional information, such as the items ordered, the reason for the order, and the individual prices of each item. Based on factors such as who placed the order, the items requested, and the availability of funds, you can either Approve or Reject the order. Ensure that funds are available either in the Operations Account, the requestor's account, or the department account of the requestor before approving an order.
3. Ship: Now that you have one or more Approved Orders waiting to be shipped, you may send the Cargo Lift to go retrieve them. First, ensure the lift is away, and then call it back. Remember, before sending the lift down ask if anyone is on the lift platform, as when the lift goes down it will kill anyone standing on it. Again, as was stated in the Order section, the larger amount of items being shipped, the cheaper the fee per item. So it may be best to wait and try to ship multiple items at once, rather than send and recall the lift for each and every order.
4. Deliver/Pay: Once the lift has returned and the orders have arrived, it's time to deliver them and receive payment. If an order has been approved, you can accept payment in advance. To receive payment, simply use the Cargo Delivery program on a console or tablet and insert the customer's ID, select the payment tab, and press pay. If a department account needs to be charged, select the account button and select which department to charge. The funds will be deposited into the Operations Account, and you can give them their order. After delivering the order, ensure to register the order as delivered in the Cargo Delivery program. Insert the receiver's ID, select the payment tab, and press confirm delivery.

Sorting the Warehouse

Operations houses a large warehouse containing a variety of items that differ in their usefulness and utility. While there is no strict requirement to distribute these items to each department, it is advisable to at least organize the warehouse beforehand, grouping similar items in the same crate. Below is a guide on which items are most suitable for each department:

• Security: Any contraband, weapons, or security equipment.
• Medical: Any chemicals, medical tools, or medical supplies.
• Research/Machinist: Any advanced machine parts, robotic limbs, exosuit modules, hardsuits, steel, glass, phoron, gold, silver, diamonds and uranium.
• Mining: Mining tools, magboots, kinetic accelerators, or lanterns.
• Engineering: Any EVA gear not given to mining, materials not given to research, tools, signs, and firefighting equipment (fire axes included).
• Commissary: Miscellaneous items that do not fit the criteria for another department, or are worth selling in the ship's commissary.

Anything not mentioned here may be distributed as you feel is best, but should be done so reasonably.

Be warned, the warehouse does, at times, contain dangers. Hostile creatures or drones can be present in the warehouse crates, so open with caution.

Mailing

Mailing will allow you to distribute packages through the disposals system. However, lockers, when mailed, will be flung from the disposals fairly violently, so take care and warn recipients ahead of time. The process for mailing is as follows:

• Using a roll of parcel paper, wrap your item/crate/locker.
• Grab a Destination Tagger (which looks like a red and black label maker) and set a destination.
• Mark the parcel with the destination.
• Put the item/crate/locker onto the belt, and take care not to fall into it yourself, or you will take a very brief, painful, and likely lethal ride to the Disposals Crusher.
• Request your crate back from the department, if needed.

It is important to remember that anything not marked with a destination tag will be sent directly to the Disposals Crusher, so pay attention.

Reloading ship weapons

On specific occasions, you may be ordered to reload The Francisca, The Longbow, and the The Grauwolf. You can find the ammunition for these weapons inside the Secure Ammunition Storage, in the Tech Storage west of the Operations Bay.

Managing the ship weapons requires coordination with the Bridge, and the use of a powerloader found in the gun compartments. The loading of weapons should not be performed until the Bridge requests it, both to minimize safety risks of moving munitions and to avoid awkward cases where the pre-loaded munitions are different to what the Bridge requests. When receiving loading orders from the Bridge, look for 3 key details: Which gun, type of munitions, and how many. After receiving a loading order, it is best practice to acknowledge the order.

The process of loading each weapon varies. Detailed instructions can be found on the Guide to Gunnery for both Longbow and Grauwolf. Regardless of weapon, certain practices should be maintained. Always ensure the doors into the Secure Ammunition Storage are closed and bolted, as well as the blast doors down. Warn the rest of the crew when transporting warheads to avoid incidents and accidents that might lead to accidental detonation. Lastly, alert the Bridge when the loading order is complete.

Orion Express Courier System

Throughout a shift, you may receive black and white Orion Express packages from a delivery belt in the warehouse. This will be accompanied by a radio message that new deliveries are available. These packages can be delivered to their designated destination to generate funds for the Operations Department. The delivery process is as outlined below:

• Access Courier's Locker: Find the courier's locker, also situated at the back of the warehouse. Inside, you'll find essential supplies, including a cargo pack capable of accommodating up to two cargo packages.

• Request Transportation: Seek assistance from a fellow crew member (like a Shaft Miner on the Spark, a Xenoarcheologist on the Quark, or a Bridge Crewman on the Canary) to secure transportation to the designated exoplanet or vessel.

• Make the Delivery: Upon arrival, navigate to the specified coordinates on the package and deposit it into the chute.

Couriers receive a 2% tip for each delivery, while the Operations Department receives the funds allocated on the package. It is recommended for couriers to always have an escort to mitigate potential security risks, like local wildlife or unauthorized personnel trying to intercept packages.

Shuttle Refueling

Shuttles making multiple flights during a shift will likely need refueling of either their primary thruster fuel, or their secondary thruster fuel. This is usually performed by a Hangar Technician. To refuel a shuttle, a wrench and crowbar are necessary. The process is as follows: For the primary fuel

1. Locate the CO2 canister on the shuttle. This is either in the main compartment of the shuttle, or in a compartment towards the rear for larger shuttles such as the Intrepid.
2. Use the wrench to disconnect the canister.
3. Bring the canister to the Fuel Bay located on the starboard side of the Intrepid Hangar.
4. Place the canister on the rightside connector, using the wrench to connect the canister
   • Another CO2 canister may already be present. Swap the canisters when refueling.
5. Turn on the CO2 pump to maximum output.
6. Take the full canister back to the shuttle, and reconnect onto the fuel connector using the wrench.

For the secondary fuel

1. Locate the fuel port, a light grey box usually towards the main airlock of a shuttle.
2. Use the crowbar to open the fuel port, then an empty hand to remove the phoron tank.
3. Refuel the phoron tank utilizing the phoron canister in the Fuel Bay located on the starboard side of the Intrepid hangar.
4. Return the phoron tank to the fuel port on the shuttle.
5. Use the crowbar to close the fuel port.

Equipment

The Operations Department has some tools that can assist you in supplying the ship.

Autolathe

The Autolathe can be filled with glass, steel, aluminum, and plastic in order to fabricate tools, containers, radios, and other items which may be requested. There should be some materials in the Operations Office on a table, just so you can supply the Autolathe.

Operations Tug

A relatively complex machine to use - the cargo tug is essentially a small train to manually transport multiple crates. To link it up, drag the chain link from the unhooked wagon to the hooked wagon (or train tug). Make sure that the chain link is in the right direction, however - that can be ensured by pushing the cart into the tug/train.

To activate the tug's engine, locate the keys and turn them in the ignition (do not lose these keys, as they will render the tug inoperable).

To load the tug's platforms, simply place yourself firmly in front of the wagon and lift the crate onto it.

The cargo tug is powered by a power cell, which may run out and require replacement. To replace the power cell, use a screwdriver to undo the panel on the tug's exterior. Then, use a crowbar to extract the depleted power from the latch, and insert a new power cell. Finally, secure the panel back into place using the screwdriver.