Hangar Technician - Revision history

William Murdoch: /* Shuttle Refueling */ Air station needs to be included

2026-02-22T04:36:57Z

Shuttle Refueling: Air station needs to be included

← Older revision		Revision as of 04:36, 22 February 2026
Line 75:		Line 75:
	It is recommended for couriers to always have an escort to mitigate potential security risks, like local wildlife or unauthorized personnel trying to intercept packages.		It is recommended for couriers to always have an escort to mitigate potential security risks, like local wildlife or unauthorized personnel trying to intercept packages.

	===Shuttle ~~Refueling~~===		===Shuttle Servicing===
	Shuttles making multiple flights during a shift will likely need refueling of either their primary thruster fuel, or their secondary thruster fuel. This is usually performed by a Hangar Technician. To refuel a shuttle, a wrench and crowbar are necessary. The process is as follows:		Shuttles making multiple flights during a shift will likely need refueling of either their primary thruster fuel, or their secondary thruster fuel. This is usually performed by a Hangar Technician. To refuel a shuttle, a wrench and crowbar are necessary. The process is as follows:
	For the primary fuel		For the primary fuel
Line 91:		Line 91:
	#Return the phoron tank to the fuel port on the shuttle.		#Return the phoron tank to the fuel port on the shuttle.
	#Use the crowbar to close the fuel port.		#Use the crowbar to close the fuel port.
			Alongside fuel, shuttles utilize a self-contained atmosphere during flight. Every shuttle has an air tank for the compartment atmosphere, with larger shuttles using a waste tank as well. At times, these tanks need to be refilled or empties, especially in cases where a shuttle lost atmosphere. These operations can be performed at the air station between the Intrepid and Quark hangars. Air canisters can be identified by their white paint scheme, while waste canisters are yellow with black markings. By default, the ports in the air station are already connected and on, so no additional prep is needed. After air has been replenished and waste purged, canisters should be returned to their ports. If additional help is needed, an [[Atmospheric Technician]] can be contacted.

			'''Note:''' Some air tanks are utilized by the airlocks. They are typically positioned by airlocks, and do not have any pumps connected to them. Avoid refilling these tanks unless the airlock has run out of air. Standard airlocks, when open, will be connected to an air canister with 137 kPa of pressure. The air station fills canisters to 5 MPa, so adjustments will be needed to the supplying air pump if an airlock canister must be replenished.

	==Equipment==		==Equipment==

William Murdoch at 18:54, 17 February 2026

2026-02-17T18:54:19Z

← Older revision		Revision as of 18:54, 17 February 2026
Line 8:		Line 8:
	\|access=Maint Tunnels, Mail Sorting, Basic Operations		\|access=Maint Tunnels, Mail Sorting, Basic Operations
	\|difficulty=Easy		\|difficulty=Easy
	\|qualifications=At least 18 years of age, completion of the SCC's "Introduction to Refueling" program.		\|qualifications=At least 18 years of age, completion of the SCC's "Introduction to Refueling" program, and meets the [[Stellar Corporate Conglomerate Occupation Qualifications]].
	\|employers = [[Orion Express]], [[Hephaestus Industries]].		\|employers = [[Orion Express]], [[Hephaestus Industries]].
	\|education = [[Tajaran Educational Institutions#Nal'tor College of Career Excellence\|Nal'tor College of Career Excellence]]		\|education = [[Tajaran Educational Institutions#Nal'tor College of Career Excellence\|Nal'tor College of Career Excellence]]

William Murdoch: /* Operations Tug */

2026-02-07T18:12:57Z

Operations Tug

← Older revision		Revision as of 18:12, 7 February 2026
Line 117:		Line 117:
	The cargo tug is powered by a power cell, which may run out and require replacement. To replace the power cell, use a screwdriver to undo the panel on the tug's exterior. Then, use a crowbar to extract the depleted cell from the latch, and insert a new power cell. Finally, secure the panel back into place using the screwdriver.		The cargo tug is powered by a power cell, which may run out and require replacement. To replace the power cell, use a screwdriver to undo the panel on the tug's exterior. Then, use a crowbar to extract the depleted cell from the latch, and insert a new power cell. Finally, secure the panel back into place using the screwdriver.

	The cargo tug is a fast vehicle, and is capable of running over ~~others. This can be very~~ [[Traitor\|~~dangerous~~]], and ~~possible~~ incur charges from [[Security Officer\|Security]]. It is recommended to remain in the center of large hallways, and to even announce the tug will be in operation before entering the halls.		The cargo tug is a fast vehicle, and is capable of pushing others, or even running them over [[Traitor\|when tampered with]]. This can be annoying if not dangerous, and possibly incur charges from [[Security Officer\|Security]]. It is recommended to remain in the center of large hallways, and to even announce the tug will be in operation before entering the halls.

	{{Guides}}		{{Guides}}

William Murdoch: /* Sorting the Warehouse */

2026-02-07T18:11:02Z

Sorting the Warehouse

← Older revision		Revision as of 18:11, 7 February 2026
Line 43:		Line 43:

	Be warned, the warehouse does, at times, contain dangers. Hostile creatures or drones can be present in the warehouse crates or roaming the warehouse floor, so carry caution when entering the warehouse or opening crates. Additionally, the side rooms of the warehouse can contain hazardous materials, such as nuclear waste or explosive fuel tanks.		Be warned, the warehouse does, at times, contain dangers. Hostile creatures or drones can be present in the warehouse crates or roaming the warehouse floor, so carry caution when entering the warehouse or opening crates. Additionally, the side rooms of the warehouse can contain hazardous materials, such as nuclear waste or explosive fuel tanks.

			Crates can be stored either in the warehouse or in the Commissary via crate shelves. These shelves can stack up to three crates in a single tile to conserve space. To place a crate on a shelf, simply click-drag the crate onto the shelf. To remove the crate, click-drag the same crate from the shelf onto an adjacent tile.

	===Mailing===		===Mailing===

William Murdoch: /* Operations Tug */

2026-02-07T18:09:06Z

Operations Tug

← Older revision		Revision as of 18:09, 7 February 2026
Line 109:		Line 109:
	A relatively complex machine to use - the cargo tug is essentially a small train to manually transport multiple crates. To link it up, drag the unhooked wagon to the hooked wagon (or train tug). To unhook wagons from the train, use a wrench on the wagon you want to unhook. All of the wagons start hooked to the tug at the start of a shift.		A relatively complex machine to use - the cargo tug is essentially a small train to manually transport multiple crates. To link it up, drag the unhooked wagon to the hooked wagon (or train tug). To unhook wagons from the train, use a wrench on the wagon you want to unhook. All of the wagons start hooked to the tug at the start of a shift.

	To toggle the tug's engine, click the tug and select the button stating either "stopped" or "running" at the top of the interface. The keys start in the ignition at the start of a shift, however they can be removed by clicking the keys button on the tug interface. Boarding the tug requires you to be adjacent to the tug body, then click-dragging your character onto the tug. To get off of the tug, use resist. This will place you in an open adjacent tile, which sometimes can be boxed in, so be careful about where you place the tug before getting off.		To toggle the tug's engine, click the tug and select the button stating either "stopped" or "running" at the top of the interface. The keys start in the ignition at the start of a shift, however they can be removed by clicking the keys button on the tug interface. These actions can also be performed through a radial menu by ctrl-clicking the tug. Boarding the tug requires you to be adjacent to the tug body, then click-dragging your character onto the tug. To get off of the tug, use resist. This will place you in an open adjacent tile, which sometimes can be boxed in, so be careful about where you place the tug before getting off.

	To load the tug's platforms, stand adjacent to an open wagon and click-drag the object onto the wagon. To remove an object from a wagon, click the wagon body. The object will be moved into your tile.		To load the tug's platforms, stand adjacent to an open wagon and click-drag the object onto the wagon. To remove an object from a wagon, click the wagon body. The object will be moved into your tile.

William Murdoch: /* Reloading ship weapons */

2026-02-07T17:09:20Z

Reloading ship weapons

← Older revision		Revision as of 17:09, 7 February 2026
Line 54:		Line 54:

	===Reloading ship weapons===		===Reloading ship weapons===
	On specific occasions, you may be ordered to reload [[Guide to Gunnery#The Francisca\|~~The~~ Francisca]], [[Guide to Gunnery#The Longbow\|~~The~~ Longbow]], and the		On specific occasions, you may be ordered to reload [[Guide to Gunnery#The Francisca\|the Francisca]], [[Guide to Gunnery#The Longbow\|the Longbow]], and the
	[[Guide to Gunnery#The Grauwolf\|~~The~~ Grauwolf]]. You can find the ammunition for these weapons inside the Secure Ammunition Storage, in the Tech Storage west of the Operations Bay.		[[Guide to Gunnery#The Grauwolf\|the Grauwolf]]. You can find the ammunition for these weapons inside the Secure Ammunition Storage, in the Tech Storage west of the Operations Bay.

	Managing the ship weapons requires coordination with the Bridge, and the use of a powerloader found in the gun compartments. The loading of weapons should not be performed until the Bridge requests it, both to minimize safety risks of moving munitions and to avoid awkward cases where the pre-loaded munitions are different to what the Bridge requests. When receiving loading orders from the Bridge, look for 3 key details: Which gun, type of munitions, and how many. After receiving a loading order, it is best practice to acknowledge the order.		Managing the ship weapons requires coordination with the Bridge, and the use of a powerloader found in the gun compartments. The loading of weapons should not be performed until the Bridge requests it, both to minimize safety risks of moving munitions and to avoid awkward cases where the pre-loaded munitions are different to what the Bridge requests. When receiving loading orders from the Bridge, look for 3 key details: Which gun, type of munitions, and how many. After receiving a loading order, it is best practice to acknowledge the order.

	The process of loading each weapon varies. Detailed instructions can be found on the [[Guide to Gunnery]] for both Longbow and Grauwolf. Regardless of weapon, certain practices should be maintained. Always ensure the doors into the Secure Ammunition Storage are closed and bolted, as well as the blast doors down. Warn the rest of the crew when transporting warheads to avoid incidents and accidents that might lead to accidental detonation. Lastly, alert the Bridge when the loading order is complete.		The process of loading each weapon varies. Detailed instructions can be found on the [[Guide to Gunnery]] for both Longbow and Grauwolf. Regardless of weapon, certain practices should be maintained. Always ensure the doors into the Secure Ammunition Storage are closed and bolted, as well as the blast doors down. Warn the rest of the crew when transporting warheads to avoid incidents and accidents that might lead to accidental detonation. Lastly, alert the Bridge when the loading order is complete.

	===Orion Express Courier System===		===Orion Express Courier System===
	Throughout a shift, you may receive black and white Orion Express packages from a delivery belt in the warehouse. This will be accompanied by a radio message that new deliveries are available. These packages can be delivered to their designated destination to generate funds for the Operations Department. The delivery process is as outlined below:		Throughout a shift, you may receive black and white Orion Express packages from a delivery belt in the warehouse. This will be accompanied by a radio message that new deliveries are available. These packages can be delivered to their designated destination to generate funds for the Operations Department. The delivery process is as outlined below:

William Murdoch: /* Shuttle Refueling */

2026-02-07T17:08:57Z

Shuttle Refueling

← Older revision		Revision as of 17:08, 7 February 2026
Line 89:		Line 89:
	#Return the phoron tank to the fuel port on the shuttle.		#Return the phoron tank to the fuel port on the shuttle.
	#Use the crowbar to close the fuel port.		#Use the crowbar to close the fuel port.


	==Equipment==		==Equipment==

William Murdoch: /* Equipment */ Scanners, the tablet, and making the cargo tug guide not written in a pseudo-IC voice

2026-02-07T17:08:47Z

Equipment: Scanners, the tablet, and making the cargo tug guide not written in a pseudo-IC voice

← Older revision		Revision as of 17:08, 7 February 2026
Line 95:		Line 95:
	===Autolathe===		===Autolathe===
	The Autolathe can be filled with glass, steel, aluminum, and plastic in order to fabricate tools, radios, and other items which may be requested. There should be some materials in the Operations Office on a table, just so you can supply the Autolathe.		The Autolathe can be filled with glass, steel, aluminum, and plastic in order to fabricate tools, radios, and other items which may be requested. There should be some materials in the Operations Office on a table, just so you can supply the Autolathe.

			===Tablet===
			The tablet provided in Hangar Technician lockers is nearly identical to other PDAs, however it comes pre-loaded with various Operations applications that can be useful during shifts. The primary one of note is the Cargo Delivery program, which is utilized during order deliveries.

			===Scanners===
			A variety of scanners are available to Operations staff. These scanners all look the same, however have different colors to designate their purpose.
			*'''Blue:''' The blue crate contents scanner prints a list of contents for any closed crate that it is used on. It is not required, however it is good practice to provide a list of contents for crates in the warehouse, especially those being stored for later or shipped to other departments.
			**'''Note:''' The scanner does not work on locked crates.
			*'''Yellow:''' The yellow price scanner can be used on any item to check for its value. Currently, the prices listed by the scanner are not accurate, therefore it should '''not be used'''.
			*'''Green:''' The green exports scanner checks for the income an item will generate when it is exported on the Cargo Lift. It also checks whether an item is present on the bounties list.
			*'''Red:''' The red destination tagger is not technically a scanner, however it shares a similar model to the other scanners. This device can tag any wrapped item, crate, or locker with a destination. When the item is placed into the disposals network, it will go to the set destination.

	===Operations Tug===		===Operations Tug===
	A relatively complex machine to use - the cargo tug is essentially a small train to manually transport multiple crates. To link it up, drag ~~the chain link from~~ the unhooked wagon to the hooked wagon (or train tug). ~~Make sure that~~ the ~~chain link is~~ in the ~~right direction~~, however ~~- that~~ can be ~~ensured~~ by ~~pushing~~ the ~~cart into~~ the tug~~/train~~.		A relatively complex machine to use - the cargo tug is essentially a small train to manually transport multiple crates. To link it up, drag the unhooked wagon to the hooked wagon (or train tug). To unhook wagons from the train, use a wrench on the wagon you want to unhook. All of the wagons start hooked to the tug at the start of a shift.

			To toggle the tug's engine, click the tug and select the button stating either "stopped" or "running" at the top of the interface. The keys start in the ignition at the start of a shift, however they can be removed by clicking the keys button on the tug interface. Boarding the tug requires you to be adjacent to the tug body, then click-dragging your character onto the tug. To get off of the tug, use resist. This will place you in an open adjacent tile, which sometimes can be boxed in, so be careful about where you place the tug before getting off.

	To ~~activate~~ the tug's ~~engine~~, ~~locate~~ the ~~keys and turn them in~~ the ~~ignition (do not lose these keys~~, ~~as they~~ will ~~render the tug inoperable)~~.		To load the tug's platforms, stand adjacent to an open wagon and click-drag the object onto the wagon. To remove an object from a wagon, click the wagon body. The object will be moved into your tile.

	To ~~load~~ the tug's ~~platforms~~, ~~simply place yourself firmly in front of~~ the ~~wagon~~ and ~~lift~~ the ~~crate onto it~~.		The cargo tug is powered by a power cell, which may run out and require replacement. To replace the power cell, use a screwdriver to undo the panel on the tug's exterior. Then, use a crowbar to extract the depleted cell from the latch, and insert a new power cell. Finally, secure the panel back into place using the screwdriver.

	The cargo tug is ~~powered by~~ a ~~power cell~~, ~~which may run out~~ and ~~require replacement~~. ~~To replace the power cell~~, ~~use a screwdriver to undo the panel on the tug's exterior~~. ~~Then, use a crowbar~~ to ~~extract the depleted power from~~ the ~~latch~~, and ~~insert a new power cell. Finally, secure~~ the ~~panel back into place using~~ the ~~screwdriver~~.		The cargo tug is a fast vehicle, and is capable of running over others. This can be very [[Traitor\|dangerous]], and possible incur charges from [[Security Officer\|Security]]. It is recommended to remain in the center of large hallways, and to even announce the tug will be in operation before entering the halls.

	{{Guides}}		{{Guides}}

William Murdoch: /* Autolathe */

2026-02-07T16:47:55Z

Autolathe

← Older revision		Revision as of 16:47, 7 February 2026
Line 94:		Line 94:
	The Operations Department has some tools that can assist you in supplying the ship.		The Operations Department has some tools that can assist you in supplying the ship.
	===Autolathe===		===Autolathe===
	The Autolathe can be filled with glass, steel, aluminum, and plastic in order to fabricate tools~~, containers~~, radios, and other items which may be requested. There should be some materials in the Operations Office on a table, just so you can supply the Autolathe.		The Autolathe can be filled with glass, steel, aluminum, and plastic in order to fabricate tools, radios, and other items which may be requested. There should be some materials in the Operations Office on a table, just so you can supply the Autolathe.

	===Operations Tug===		===Operations Tug===

William Murdoch: /* Mailing */

2026-02-07T16:46:03Z

Mailing

← Older revision		Revision as of 16:46, 7 February 2026
Line 51:		Line 51:
	*Put the item/crate/locker onto the belt, and take care not to fall into it yourself, or you will take a very brief, painful, and likely lethal ride to the mailing room and disposals crusher.		*Put the item/crate/locker onto the belt, and take care not to fall into it yourself, or you will take a very brief, painful, and likely lethal ride to the mailing room and disposals crusher.
	*Request your crate back from the department, if needed.		*Request your crate back from the department, if needed.
	It is important to remember that anything not ~~marked with a destination tag~~ will be sent directly to the Disposals Crusher, so pay attention.		It is important to remember that anything not wrapped will be sent directly to the Disposals Crusher, while anything wrapped but not tagged will end up in the mailing room, so pay attention.

	===Reloading ship weapons===		===Reloading ship weapons===